This is an oversized item with dynamic shipping costs. Please contact us at 610-906-3315 for the most current competitive shipping rates.
INSTALLATION TIPS
-Locate equipment on a smooth, level surface
-Maintain an air-gap at the end of the drain line
-Secure drain line directly over floor drain or stand pipe
-When connecting to a water heater, install a check valve on the soft water piping to prevent hot water back-up
-When sweating/installing copper piping, protect the control valve from excessive heat
-Check local codes for additional equipment that may be required, such as backflow prevention devices (i.e., RPZ)
OPERATION TIPS
-Check for softened water each time salt is added, by using a soap or hardness test kit
-Use a good quality grade of salt -Solar or pellet are preferred
-Check the salt level on a regular basis
-Maintain at minimum salt depth of 6″ to ensure a proper regeneration
-On iron bearing waters, use a salt that contains an iron “fighting” additive, or use a resin cleaner on a regular basis
-Check the water level in the brine tank
-If abnormally high – refer to IO guide for troubleshooting information
APPLICATION or SIZING
-Warewashing
-Laundry – Linen & Uniform
-Boiler Scale Control
-Water Heater Scale Protection/Reduction
-General Housekeeping