EverPure MRS-100 RO SYSTEM 115 VAC Model EV997007 EverPure

INSTALLATION TIPS
-Choose a mounting location capable of safely supporting the full weight of the system when in operation
-Deliming of existing water using equipment is recommended
-Never use saddle valve for connection
-Use 3/8″ (9.5 mm) minimum water line
-The water inlet must supply a minimum of 0.7 gpm (2.7 lpm)
-Install vertically with cartridges hanging down and allow 3″ (76 mm) on all four sides of unit for cover removal and service access
-The product water tubing/piping and associated fittings connecting the RO product outlet to the equipment being serviced should be suitable for use with high purity water
-Refer to Installation, Operation & Maintenance Manual for cartridge flushing and RO start-up

OPERATION TIPS
-Change filter cartridges on a regular 6-month preventative maintenance program
-Change RO cartridges on a regular 2-year preventative maintenance program
-Change cartridges when capacity is reached
-Always flush the filter cartridge at time of installation and cartridge change
-Proper pre-treatment is required to control RO Cartridge (membrane) scale formation and/or fouling
-Raw water hardness in excess of 7 grains per gallon (120 ppm) should be softened
-The raw water may contain particulates and the use of a pre-filter is recommended
-Contact EVERPURE Technical Service for pre-treatment recommendations

APPLICATION or SIZING
-Mineral Reduction System for foodservice applications
-Ideal for: Flash steamers, conventional steamers, cheese melters, combi-ovens and coffee/espresso machines
-Daily Production Rate: MRS-100/100CC:
: 100 gpd (379 lpd) nominal
: 0.069 gpm (0.263 lpm) nominal
-MRS-225/225CC: 225 gpd (852 lpd) nominal
: 0.156 gpm (0.591 lpm) nominal
-For use in coffee, steam, reconstitution, ice and multiple applications